rf variable attenuator

...: Frequency Range(MHz) DC-3000 VSWR ≤ 1.25 Attenuation(dB) 3 5 6 10 15 20 30 Accuracy(dB) ±0.6 ±0.6 ±0.6 ±0.8 ±0.9 ±1.1 ±1.6 Average Power(W) 10 Impedance(Ω) 50 RF Connector In: N-F/Out: N-F Color Gray Relative humidity 5%~95% Operating

...RF Coaxial Attenuators RF attenuators usually can be used to reduce the power of the signal within many RF circuit designs and RF systems. These RF attenuators can be fixed, switched,surface mounted or even continuously variable. Vinncom has many types of RF attenuators with different frequency range. Vinncom also can supply attenuators...

... with analog control and >30 dB of attenuation. Excellent linearity is maintained over the full attenuation range. The attenuation level is set by two control voltages of 0 to -2 V. This device is assembled in a lead free 3 mm 16 lead PQFN plastic package.

... continuously or by step within certain frequency range,they can also be used to adjust the test system’s power as inset attenuator . Power Rating: 2W Frequency(GHz): DC-2.5Ghz Impedance: 50Ω Attenuation Range: 5-20dB ConnectorNK-NK: NK-NK Max VSWR: 2.5

...Variable Pushbutton Step Attenuators N connectors, Key-Press Attenuator Details: l Excellent electrical performance l Lowest antenuation tolerance l Low VSWR l Totally maintenance free Application: Attenuators are used in a wide variety of applications and can satisfy almost any requirement where a reduction in power is needed. Attenuators...

... for needing.They are used in the transmit line of fiber.There are two kinds of attenuator,alterable and fixable .The attenuation form 1dB to 65dB. Optic attenuator is a precise device that provide the attenuation form 1dB to 65dB.It is design under the

... in fiber optic systems and test sets. When mated to a standard connector, the variable attenuator connector causes the optical signal to become attenuated by creating a variable air gap between the connector ferrules. Attenuation is adjusted by means of a

...155dbc 160dbc 5~40dB RF Coaxial Attenuators Low PIM up to -153/-163dBc@43dBm*2 Wide band frequency High indicator stability Part Number VN-LPAT-0640-50W-ONx Operating Frequency ( MHz ) 600-4000 Impedance ( Ohm ) 50 VSWR ≤1.30 Attenuation (dB) 5 6 7 8 10 ...

... model: SC/PC, UPC, APC * Operating wavelengths 1310 and 1550 (nm) * Attenuation 1~30 (dB) * Temperature range -40~+85 (DEG C) Description: Variable attenuator used in optical fiber transmission lines, continuous variable attenuation of light intensity, to

...variable attenuator compatible with all standard Optic equipment You are here: Home > Products > Fiber optic Attenuator Serial Number: ZZTAT-FC3-M2 Description: ZGT provide fixed attenuators and variable attenuators, with different connectors such as SC, SC/APC, LC, LC/APC, FC, FC/APC, ST, MU, E2000, E2000/APC and Hybrid Attenuators. There are adapter version and plug in version, attenuation...

18 to 40GHz 60dB Digital Control Attenuator Zysen offer Digital Control Attenuator, up to 40GHz, attenuation 0 to 60dB, power handling 0.2Watts. Custom frequency bands and optimized specifications available.Contact us with your requirement. P/N Freq. Range...

...Attenuator Optical Variable Attenuator Quick Detail: Name: SC Fiber attenuator Mode: Singlemode, Multimode PC, UPC, and APC polish types optional Type: Fixed, Female & male, In-line, Variable Attenuation value: 1dB~30dB Operating Wavelength: 1310nm, 1550nm, 850nm, 1300nm Description: Fiber Optic Attenuator...

...Attenuator , Variable Attenuator Abailable Attenuation From 1-30dB Detailed Product Description Material: Plastic Or Metal Attenuator Type: Bulkhead Attenuator Connector Type: LC SC FC Attenuation Value: 1-30 DB Interface Polish: UPC/APC Bulkhead Attenuator LC,abailable attenuation from 1－30dB EX: BAT -LC-2A-02 Product Description Optical pad attenuators...

...Attenuator Customized LC UPC - LC UPC VOA In Line Variable Attenuator SM 0~60dB Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver. Optical attenuator is widely used in CWDM&DWDM, CATV systems, data center networks, test equipment and other high-power applications. In-line Variable...

...Optional Return Loss PC≥50dB, APC≥60dB Wavelength 1310nm or 1550nm Attenuation Range 0 - 30 dB Description: Fiber Optic Attenuator is used in a wide variety of applications and can satisfy almost any requirement where a reduction in power is needed.

...Attenuator In-Line Optical Variable Attenuator VOA ◇ Specifications: Parameter Unit Specifics Operating Wavelength nm 1310/1550 1064 980 850 780 633 Wavelength Range nm ±40dB ±20dB ±20dB ±20dB ±20dB ±20dB Attenuation Range dB 0~60dB (Manually runed variable) Attenuation...

...Variable Attenuator 25 dB FC / APC Type Independence Wavelength Quick detail: - Model Number: FC - Model Name: Male to female, atnt - Material: Plastic, metal - Dusty cap color: green, beige, White - Attenuation range: 0-30 dB Fiber optic attenuator descriptions: Fiber optic attenuator is a device used to reduce the power level of an optical signal, either in free space or in an optical fiber. The basic types of optical attenuators

...tem for the on-line testing, therefore, it can be used in the digital system of communication devices (such as: PHD, SDH) and also in the system of adopting analog modulation (CATV) Features stepwise attenuating by circumgyrated dial: attenuating step 0

...Variable Optical Attenuator optic fiber variable attenuator VOA Product Description Gezhi Photonics MEMS attenuators (MEMS VOAs) are based on a micro-electro-mechanical system (MEMS) technology. The MEMS attenuators design achieves highly repeatable optical attenuation...